- Máximum productivity. ONA presents its new family of ONA AF machines at the 25 BIEMH; the machines are noted for the high cutting speed (450 mm2/minute with wire of 0.33 mm diameter) and low maintenance costs, thanks to the ecological filtration system, ONA AquaPrima, which does not require replaceable cartridges.

- Surface integrity 100% preserved. The ONA AF series includes the ONA Easycut generator, which provides a cut that is 100% free from electrolyte corrosion, without affecting the speed, and while preserving the surface integrity of the material being cut  (best surface finish: 0.2 µm Ra – 6 VDI).

- 6 axes controlled by the CNC. The AF models incorporate the latest generation CNC, ONA-W64, able to control 6 axes, 5 of them (B, X, Y, U, V) at the same time, enabling the machine to incorporate a rotation axis which is totally controlled by the CNC.

- Great versatility. Also of note is the huge versatility offered by this new family of machines for a large variety of tasks, as they are designed to operate with any type of wire; from 0.1 mm to 0.33 mm diameter.

- Download the catalogue (2,7 Mb)

Specifications		ONA AF 25	ONA AF 35
X/Y-axes travel	mm	400 x 300	600 x 400
Z-axis travel	mm	250	400
Worktank internal dimensions (Large x Wide x High)	mm	700 x 650 x 250	1060 x 750 x 400
Allowable weight on table	Kg	700	1500
U/V-axes travel	mm	120 x 120	120 x 120
Maximum taper angle	º	± 30 º/87 mm	± 30º/87 mm
Wire diameter range	mm	0.10 - 0.33	0.10 - 0.33

 

Erosion EXPERT SYSTEM	Standard
"Automatic Strategy" (eliminates G-code programming)	Standard
CAD CAM software ESPRIT GOLD	Optional
Patented mineral filtering system (no maintenance)	Optional
Programmable "Z" axis positioning	Standard
Programmable dielectric-fluid pressure	Standard
Full automatic wire threading (AWT) and rethreading	Standard
Wire choper	Standard
Hands controller	Standard
	Go back